For more information about the Scan Driver, refer to the section entitled, Installing the Network Scanner Utility, in this chapter. Yield will vary based on image, area coverage and media used. At the Workstation From the Start menu, select Settings then select Printers to display the Printing Preferences. Select Start to make copies or Save to select additional features. When this feature is selected, each page is copied onto a separate sheet of paper. Selecting this feature saves the scanned data in either high, normal, or low compression rates. Each feature is explained in detail on the following pages.
Substitute Tray Set whether or not to switch to paper in a different tray when the tray that was selected in Auto Tray Switching runs out of paper. This section describes how to import data in the mailbox of the machine to the computer. Select the printer, and then select Properties. Select the icon that most closely resembles the Original Orientation for the loaded document s. Xerox WorkCentre M24 Details: Xerox WorkCentre M24 has multi-tasking capabilities such as: printing, copying, scanning, faxing, and e-mail. You can now store a new job in place of the job you deleted. The job currently being processed will be discontinued.
The image can be centered on the copy or moved to the top, bottom, left or right. The innovative paper handling on the Xerox WorkCentre M24 allows offices to create more with minimal downtime. Or using the numeric keypad, you can enter numbers in the Go to box to go directly to a specific Mailbox. The following options are available: The Auto Color option enables the copier to determine if the document is black and white or color. The Mailbox screen is displayed. If the edge of the jammed paper can be reached at the output tray, pull the jammed paper in the direction of the feed-out tray.
Select the paper tray to use for the Separators and N sets. Do not perform any maintenance procedures unless you have been trained to do them by a Xerox representative, or unless a procedure is specifically described in one of the manuals included with your press. Select Start to make copies or Save to select additional features. Each feature is explained in detail on the following pages. Options for compression include High Quality and High Compression. Enter the setting on the Numeric Keypad using the numbers listed in the following table.
Copies may be reduced to 25% or enlarged to 400%, in 1% increments. To enable Auditron for print you must set up user accounts for printing, and turn it on through Internet Services. The following options are available: 1 to 1 Sided Makes one-sided copies from one-sided input. To pause a job, select the Pause button. From the front panel in the device, go to the Machine Status menu and select the Machine Information tab. Single Color Set the default for Single Color on the Basic Copying screen.
The maximum number of originals that can be used is 100. A list displays whether jobs have been completed normally or not. Select the printer icon in the Printers window, then select Properties from the File menu. Set the Border Erase feature, Variable Erase option, to 4mm to minimize the deletion. Load your originals and select the mailbox for saving the scanned data.
On the Added Features tab select 2 Sided. Various options available through Xerox Alliance Partner solutions. The Color Saturation feature allows you to adjust the overall richness of color on the copy. The Print Confirmation screen is displayed. This section will provide an introduction to the WorkCentre M24 which is also referred to as the WorkCentre 24.
When Auditron Mode is enabled, the user must select the Access button and enter the appropriate user account password to start using the machine. Push the tray in gently until it comes to a stop. Select the printer icon in the Printers window, then select Properties from the File menu. You can also reset this data. Added to cart Accurate, clear and concise text, combined with detailed illustrations, lists of error code, instruction and diagrams, guide you through procedure of repair, remediate, maintenance and adjustments your copier, printer or. AirPrint is enabled on Xerox® devices by default.
The Machine Information screen is displayed. Web Pages: This setting is optimized for printing web pages. Select On, and enter the new password using the numeric keypad on the Control Panel. Select the job number you want to delete. Testing conducted by independent printer evaluation laboratories proved Xerox Genuine Supplies are more reliable and deliver up to 27% higher page yields than aftermarket alternatives. In addition to the transparency set, you may also select copy sets. Select when you want to output sample prints.
It also includes some paper usage guidelines for the WorkCentre 24. Select the printer icon in the Printers window, then select Properties from the File menu. Print Meter Report Check the total number of pages printed on this machine. This is the default setting. The following options are available: The copier automatically determines which output mode collated or uncollated for the job and delivers the copies to the output tray. To reset this data, select Reset. The System Administrator Data screen is displayed.