Do not operate this machine on a slope greater than 15 degrees. Repeat with the other motion control lever. This product is capable of amputating hands and feet and throwing objects. Loading a machine onto a trailer or truck increases the possibility of tip-over and could cause serious injury or death. If loading on or near a slope, position the trailer or truck so that it is on the down side of the slope and the ramp extends up the slope. Replace the mower belt if any of these conditions are evident.
Use the slope chart to determine the degree of slope of hills before operating. They are flammable and the vapors are explosive. Travel slowly and allow extra distance to stop. Repeat this procedure on each blade. The machine is now able to be pushed by hand. . The ignition switch has 3 positions, Off, Run, and Start.
The blades must be replaced if a solid object is hit, if the blade is out of balance, or the blade is bent. Ensure this is done for each lever. Contact with blade or thrown debris can cause injury or death. Whenever you need service, genuine Toro parts, or additional information, contact an Authorized Service Dealer or Toro Customer Service and have the model and serial numbers of your product ready. Always follow all safety instructions to avoid serious injury or death. Maintain the air pressure in the front and rear tires as specified.
Slopes are a major factor related to loss of control and tip-over accidents, which can result in severe injury or death. Check for a buildup of dirt and debris around the air-cleaner system. This machine is a ride-on, rotary-blade lawnmower intended to be used by homeowners in residential applications. Clean dirt and chaff from the outside of the engine cylinder head fins and blower housing. It is important that no dirt or contamination enter hydraulic system. Note: Rotate the rear nut clockwise to raise the mower deck; rotate the rear nut counter-clockwise to lower the mower deck.
When the lever is moved up, toward the operator the deck is raised from the ground and when moved down, away from the operator it is lowered toward the ground. Do not drive machine on a public street or roadway. Reduce the towed weight and slow down. With hundreds of pages, it will show you how to distinguish any problem from an oil change to a transmission swap and how to fix it on your own. Look behind and to the side before changing directions.
Engage the blade control switch and let the mower run for one to three minutes. Do not use the numbers off the engine or the name appearing on the product's decal. This will minimize the ramp angle. The trim setting can also be used to operate the machine at a high throttle setting and blade speed while still being able to reduce ground speed to increase quality of cut. Note: The filter and oil are changed at the same time.
A serial number is required to access most manuals. Tragic accidents can occur if the operator is not alert to the presence of children. This vastly improves the machine maneuverability but may require some adjustment if the operator is unfamiliar. Repeat this procedure until the blade is balanced. Operators should evaluate their ability to operate the riding mower safely enough to protect themselves and others from serious injury.
Equivalent alternate brand plugs can also be used. Operation on all slopes requires extra caution. You are responsible for operating the product properly and safely. Driving the machine benefits from an understanding of what zero turn radius mower means. Check the front-to-rear blade level any time you install the mower. Turning down the slope reduces traction.
Do not overcharge the battery. If the blade is not balanced, file some metal off the end of the sail area only Figure. Tearing and shredding turns grass brown at the edges, which slows growth and increases the chance of disease. Inspect the grass deflector for damage before each use. A fire or explosion from gasoline can burn you and others and can damage property. If the edges are not sharp or have nicks, remove and sharpen the blades; refer to Sharpening the Blades. You may contact Toro directly at www.