This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries. If the hexacopter keeps spinning clockwise in the air, press the left button of Trim A until it gains balance. Install the antenna to the antenna bracket. Some Things to Think About 125. After successful connection, exit settings.
. If necessary, refer to the television instructions for using the video-in connector. There are 3 flight speed available for choosing. To keep the recorded sound with the file, however, you must choose the J6i format for saving the files. Once the card is plugged in, it will appear to your computer as a removable drive. Polaroid X800 Manual Sock, skirt, shirt. Manual Roll at high speed channel : To easily enjoy the fun of rolling, player can press the one key roll button to perform roll action.
X800 Technical parameter of the hexacopter Overall height: 45mm Fuselage Length:210mm Main Rotor Diameter: 55mm Gross Weight: about 70. The camera should be fastened to the interface at the bottom of the hexacopter. Remarks:Signal connection between the hexacopter and the remote control is required for the first use. The indicator light keeps flashing rapidly: the transmitter is sending out connectional signal to the hexacopter. Set the mobile phone holder to the top of the remote control. L is low speed; M is medium speed; H is high speed.
Subject: Polaroid X800 Manual Keywords: Read Online Polaroid X800 Manual,. It means that signal connection is finished and the hexacopter is ready for flight. If the hexacopter keeps spinning clockwise in the air, press the left button of Trim B until it gains balance. The pictures you downloaded are visible in the Album window, and a file name appears below each picture. Insert the camera wire plug to port of C4005. Insert the camera wire plug to the camera interface. Serial Port selection is automatic; you do not need to edit it.
If the hexacopter keeps moving backward, press Trim C until it gains balance. Press the button, there will be a beep sound, and the remote control mode can be changed from Mode 1 to Mode 2 or Mode 2 to Mode 1. To better protect the battery, please unplug the battery cable from the power wire after the use. When the remote control is leaned backward, the hexacopter will fly backward. Mode 2 If the hexacopter keeps spinning counterclockwise in the air, press the right button of Trim B until it gains balance. Press it once to turn on the light and press it once again to turn off the light. Push up the throttle stick slowly and the hexacopter takes off.
All the directions we are talking about in this manual are subject to the definition above. Push down the throttle control stick, the rotation speeds of the mains rotors are decreasing and the hexacopter descends accordingly. Speed with limitless bandwith with only one click! This is the light switch of the hexacopter. If the hexacopter keeps moving forward, press Trim D until it gains balance. If the hexacopter keeps spinning even there is no control signal given, users may adjust trim A or trim B to keep the hexacopter balanced.
Connect the stand bar to the mobile phone fixing component. For signal interruption,turn off the remote control and turn it on again. To ensure steady flight, please set the value of the Trimmer to the midpoint. Take out the screws of the battery door by screwing counter-clockwise Pic 19. Insert the antenna bracket into interface of the foot stand and lock the screws. There is a bummer part of all this.
Unscrew counter clockwise to open the battery compartment cover. Set the connection one by one to avoid signal connection error. You should also initialize memory cards that have been initialized for other devices or have been through more than 4000 record and playback cycles. Mode 1 Mode 1 If the hexacopter keeps moving leftward, press the right button of Trim B until it gains balance. Before rolling, make sure that the hexacopter is flying 3 meters above the ground; then, press the one key roll button, the hexacopter will roll forward or backward according to the given signal. For most picture-taking, select N normal or F fine. See page 22 for more details about image quality choices.