You agree not to export or re-exportthe Software to any country in violation of the export control laws of the United States of America. . To set up the Altimeter: 1. Marine Setup The Marine Setup Page allows you to activate alarms for maritime navigation. Information in this document is subject to change without notice. Follow Steps 1 and 2 above.
The Difficulty Level determines how much of the maze you can see at one time. Scroll through the list to highlight the desired exit. To display Guidance Text: 1. These setup pages are arranged with features and data fields that can be changed to meet your requirements. Access the Information Page for the desired item highlighted from the map or selected from the Find Menu. Refer to the wiring diagram and the eTrex Vista unit data connection illustrated below.
The percentage of memory used by the current track log displays at the top of the page. To preview the turns for an Active Route: 1. The Skyview graphic represents a view looking up at the sky from your current location showing satellites and their assigned numbers. Access the Routing Setup Page. Select the row where you want the new waypoint inserted before. See page 11 for detailed information.
The map display also shows the map scale and geographic details such as lakes, rivers, highways, and towns. After the drivers are installed, your computer always detects your Vista Cx when it is connected. Press Menu to use Zoom Ranges and Hide Symbols options. Pointer - Direction pointer to a route waypoint. Guidance Text - Displays messages on the screen to advise you of your next navigation move when navigating to a destination. To set a lap distance value: 1. After submersion, be certain to wipe and air dry the unit before reuse or charging.
The maps to the left show a higher level of detail than the basemap provided with the unit i. Locate the card slot at the upper-left edge of the battery tray, and check to be certain the card is installed in the slot. This includes the Marine Points of Interest database provided with the eTrex Vista C. To navigate using the Highway Page: 1. To create a Track Log: 1.
Ranges for vertical distance are: 200, 400, 600, 800, 1,000, 2,500 and 5,000 feet. Repeat this process for city and postal codes, if desired. Sunset - The time of sunset for the current date and location. Current Destination - The next waypoint on your route. To manually calibrate the altimeter: 1.
Follow instructions on page 16. To reverse the route: 1. To obtain warranty service, an original or copy of the sales receipt fromfrom the original retailer is required. On-ScreenMessages Using the Map Page The Map Page is the primary navigation feature of the eTrex Vista C. The Main Pages section listed in same order as viewed on screen provides details about using the features of the eTrex Vista according to topic. The Saved Track Page displays the track and it also can be displayed on the Main Map Page as you navigate. Be sure to keep your original sales receipt in a safe place or attach a photocopy to the inside of the manual.
Elevation - The distance above or below mean sea level. It is your responsibility to know and abide by these laws. To set the backlighting timeout: 1. The catch is, you are the ship and you can survive only when you avoid getting hit. Bearing - The direction from your current location to a destination. You can create reference notes for multiple months and for months in years yet to come. Use the Find Menu to select a route waypoint from one of the Find Menu categories and display the Information Page for the selected waypoint, city, exit, point of interest, etc.
You can save a total of ten tracks in the unit memory. Select View Pressure Plot or View Elevation Plot, and press Enter to open the Plot Page. This chart is provided to help you determine the time offset settings for your current location if it is not in one of the time zones listed on the Time Setup Page. . Use the page Options Menu to add the item to an existing route, project a new waypoint from this location, or view sun and moon position data for this time and date. Some types of data will display only to certain zoom scales. Also shown on this page is the Amount of Memory Used, Power Status, Time, Date, and Backlighting Status.
Trip Time - Stopped - The length of time that the vehicle has been stopped stationary while the unit was powered On and tracking your location since the Trip Computer was reset. Two Data Fields are provided, and can be programmed to display a variety of navigation data. Sunset - The time at which the sun sets on this day. . To install the batteries: 1.