Quick Start Guide 1 Insert the battery. If you accidentally drop the camera into water, promptly consult your nearest Canon Service Center. If you want to photograph a person against a night scene, set the Mode Dial to Night Portrait and use a tripod p. Basic Operation Adjusting the Viewfinder Clarity Turn the dioptric adjustment knob. If you let go of the shutter button during the 10-sec. The built-inflash does not fire. This product is designed to achieve excellent performance when used with genuine Canon accessories.
X The print setting screen will reappear. When the shooting information of an image appended with the verification data is displayed p. During Live View shooting, the metering mode will be set to evaluative metering regardless of the current metering mode setting. Turn the or dial to select a Picture Style, then press. Night scenes or points of light.
Also avoid places prone to having static electricity. Do not subject to excessive force, physical shock, and vibration. Post-processingof the image with software will therefore be required. When you remove the battery from the camera, be sure to reattach the cover to protect it against short circuiting. The metering is weighted at the center covering about 3. Select the option, then press. When or is set, the three bracketed shots will be taken after a 10-sec.
This adjustment will have the same effect as using a commercially-availablecolor temperature conversion filter or color compensating filter. X When the image transfer is completed, the lamp will stay on. Otherwise, the hinge might break. Also, achieving focus may be more difficult than with Quick mode. Image tilt correction By turning the dial, you can adjust the image tilt angle by ±10 degrees in 0.
When discarding the card, destroy the card physically to prevent personal data from being leaked. If the drive mode is set to , you must press the shutter button three times. When using Live View shooting, use a memory card a hard disk-typecard such as MicroDrive is not recommended. With a fully-chargedbattery, printing up to about 3 hours is possible. Some menu items will indicate the current setting in blue. When the function turns off or if you press the shutter button halfway, the camera will be ready to shoot.
The exposure compensation amount will remain in effect even after you set the power switch to. Before disconnecting the cable, turn off the camera. Use the interface cable that came with the camera. Program shift is canceled automatically after the picture is taken. Press the button to reduce the magnification. Use this dial to set the shutter speed, aperture, etc. Image Select and order images one by one.
Under low light, the built-inflash will fire. Turn the dial to select the desired setting. In other words, it is like a highoutput flash attached externally in place of the built-inflash. The lens minimum focusing distance is measured from the focal plane mark on the camera to the subject. Also, to prevent botched pictures due to mistaken operations, shooting settings cannot be changed in the Basic Zone modes. Basic Operation Using the Quick Control Dial for Selecting Before using the dial, set the power switch to.
Symbols g Sharpness h Contrast i Saturation j Color tone k Filter effect Monochrome l Toning effect Monochrome 3 Select a parameter. Label side 2 Insert the card. If multiple faces are detected, will be displayed. With Easy printing, the number of copies will always be 1. The display quality is superb. You may damage the card by holding its flat surfaces.
Since the built-inflash will be disabled, this mode is also good for night scenes. However, the captured image will reflect the exposure setting. X The flash control screen will appear. To determine the exposure, refer to the exposure level indicator in the viewfinder or use a commercially-availablehandheld exposure meter. Using it with an incompatible battery charger or product may result in malfunction or accidents for which Canon cannot be held liable.
X The protect setting screen will appear. Tree leaves will look crisper and brighter. X The flash will fire a preflash and the required flash output is calculated and retained in memory. It features accurate color reproduction, and when you change the angle the image does not deteriorate. If the camera is used with a flash unit or flash accessory dedicated to another camera brand, the camera may not operate properly and malfunction may result.